Adveco Launches The GL Family Of Carbon Steel Tanks

Commercial hot water specialist Adveco launches the GL family of low-cost carbon steel storage tanks offer a selection of off-the-shelf vessels for commercial hot water (DHW) projects requiring direct electric heating, buffer storage, indirect heating or preheat.

  • A wide range of low-cost commercial carbon steel storage tanks and calorifiers
  • Direct electric, buffer storage, indirect heating & preheat for hot water applications
  • From 200 litre up to 5000 litre capacity for larger-scale all-electric projects

“Tough enough to deal with water conditions typically encountered across the UK, the new GL family expands options with a versatile choice of vessels with single and double coil variants, as well as no coil and the option for electric immersion to quickly and cost-effectively replace vessels in ageing commercial hot water systems,” said Bill Sinclair, technical director, Adveco.

Adveco GLE

Designed to serve as buffer vessel or electric water heater, the Adveco GLE is available in a range of sizes from 200 to 5000L to support larger all-electric systems. Compatible with a wide choice of direct electric immersion heater options available from Adveco, the GLE supports duty immersions from 3 to 36 kW, as well as secondary supplementary immersions from 3 to 6 kW for additional heating, or as backup to ensure continuity of service from a single unit.

Adveco GLC

Carbon steel calorifiers with a single fixed indirect heating coil at low level are designed to serve as indirect water heaters or preheat vessels. Available in 200 to 3000 litres capacities, GLC can also accept a 180mm 3-36kW electric immersion.

Adveco GLT

GLT carbon steel calorifiers are designed to serve as indirect water heaters. The tanks, also available in 200 to 3000 litres capacities incorporate two fixed indirect heating coils, one each at low and high level, designed for use with two separate heat sources.

To prevent corrosion the tanks are constructed from a carbon steel shell with a high-quality inorganic enamel lining. They are suitable for use in systems with maximum working pressure up to 10 bar and temperatures up to 85°C and include as standard a magnesium sacrificial anode (pre-fitted in 300-1000L variants), and a temperature gauge (pre-fitted in tanks up to 1000L).

The vessels are protected by a tough PVC jacket enclosing a rigid high-density polyurethane foam or removeable polyester fibre insulation, pre-fitted for tanks up to 1000L.

The Adveco GL range of storage tanks carries both WRAS and Kiwa’s KUKreg4 certification of product compliance with the water supply (water fittings) regulations for England, Scotland, and NI.

Supporting Ancillaries from Adveco

  • Electric Immersion Heaters from 3-36 kW (GLE / GLC & GLT 200-500L)
  • E0008/0-95C: Control Thermostat with 0-95°C range
  • E0011: Overheat thermostat
  • MB0001: Destratification pump kit
  • Unvented Kit

Adveco launches the GL family, learn more by visiting the GL product page.