Search

Commercial Air Source Heat Pumps

Explore Adveco’s range of air source heat pumps selected to deliver low-carbon preheat to domestic hot water applications for commercial building projects

Adveco’s Air Source Heat Pump Process

Commercial Air Source Heat Pumps (ASHP)

Air Source Heat Pumps (ASHP) are a low carbon technology that use ambient air as a heat source. Using a refrigerant circuit, ASHPs are able to transfer more thermal energy than electrical energy consumed, thereby delivering, under the right conditions, a very efficient source of pre-heat for commercial DHW applications.

Adveco supplies a range of ASHP’s with above average seasonal coefficient of performance (SCOP). This offers an overall higher-efficiency across varied annual UK external temperatures with consistent application working flow temperatures of 50°C.

More efficient at lower working temperatures, ASHPs lends themselves to new build projects where there is a high proportion of thermal insulation in a building. To achieve consistent high-temperature water demands in commercial applications, ASHPs are best deployed in a hybrid system, generating pre-heat for direct electric applications that raise temperatures to the required 60°C minimum while addressing peak demands.

Because ASHPs absorb heat from the air and are used to minimise use of direct electricity from the grid the technology is an excellent method for reducing carbon emissions across a commercial site.

L70 AIR SOURCE HEAT PUMP

  • Pre-sized low carbon hot water system in a tough, GRP enclosure
  • FPi32 ASHP pre-heat for 47% reduction in energy demands and CO² emissions
  • Leverages off-site construction for high- quality build & rapid deployment

FUSION PACKAGED HOT WATER SYSTEM

  • High capacity Air Source Heat Pump with 70 kW output
  • Suitable for both hot water and heating systems
  • Dedicated controls for more efficient operation

PACKAGED E32-HOT WATER SYSTEM

  • Pre-sized low carbon hot water system in a tough, GRP enclosure/li>
  • FPi32 ASHP pre-heat for 47% reduction in energy demands and CO² emissions
  • Leverages off-site construction for high- quality build & rapid deployment

FPI-32 AIR SOURCE HEAT PUMPS

  • Air Source Heat Pump range from 9kW to 12 kW
  • Suitable for a wide range of light to medium commercial projects
  • Compact and easy to install monobloc design

Contact Us

Product brochure

Adveco Hot Water Specialists - 2024 Product Guide