CWT Chilled Water Tanks
The Adveco CWT range of 300-5000 litre carbon steel primary system vessels has been carefully designed to serve a wide range of central heating and chiller applications that require a tank or energy storage vessel to expand the total system volume and increase thermal inertia.
Increasing the water capacity of a chiller system can drastically improve performance by ensuring better temperature control, increasing chiller longevity, reducing condenser cycling and improving system start-up times.
The range comes as standard with high and low-level flow and return connections on each side of the tank, and has additional connections in the middle to cater for systems featuring multiple heat or chiller sources, low and high-grade sources, or varying flow and return temperatures.
The CWT range is suitable for use with working pressures up to 3 bar and temperatures from -10 to 95°C.Â
Each CWT is supplied with 25mm insulation vapour barrier and supported by a range of ancillaries including control and overheat thermostats, automatic air vents, and gauges.
Â



Chilled Water Buffer Vessel Design: Features & Key Technologies
- 300-5,000 litre capacity
- Standard working pressure 3 bar. 6 bar available on request
- Working temperature range -10 to +95 C
- High-quality carbon steel construction
- Multiple high, mid & low level connections
- Ideal for central heating and cooling systems
Options
CWT’s mid-level connections are what set it apart from a basic single-loop buffer: they let the vessel serve systems with more than one heat or chiller source, or with varying flow and return temperatures across the system, without needing a second tank. The 25mm insulation vapour barrier is fitted as standard, and 6 bar versions are available on request where the standard 3 bar rating isn’t enough.
What is a commercial chilled water buffer vessel?
A chilled water buffer vessel is a storage tank that sits between a chiller (or a heat pump running in cooling mode) and the building’s cooling circuit, expanding the total system volume so the chiller isn’t constantly cycling to meet every small change in demand. CWT is Adveco’s carbon steel range for this role, equally suited to central heating and cooling applications, from 300 to 5,000 litres.
The problem CWT solves
Chillers, like heat pumps, perform better when they run longer, steadier cycles rather than constantly starting and stopping to chase short bursts of demand. Short-cycling wears components out faster and gives worse temperature control than a properly buffered system.
CWT solves this by adding thermal inertia to the system: more water volume for the chiller to work with means fewer, longer cycles, better temperature stability, and equipment that lasts longer under less mechanical stress.
CWT or CWS: which chilled water tank do you need?
Adveco offers two chilled water vessel ranges, and the right one depends on how complex your cooling installation is. CWT is the straightforward option: high and low-level connections as standard, with mid-level connections for systems with more than one heat or chiller source, working at a standard 3 bar (6 bar on request), covering -10°C to +95°C. CWS is the larger-scale option, purpose-built for bigger cooling installations with a low profile design for restricted plant rooms and dual-layer anti-condensation insulation. If you need straightforward buffering for a central heating or cooling system, CWT is the simpler specification. If you’re running a larger, more complex cooling installation with multiple sources, CWS is worth a look.
Technical Specifications & Downloads
Literature
Specifications
Contact Us
Frequently Asked Questions
Why Choose Adveco
50 Years
Adveco Ltd. is the independent hot water specialist for the commercial built environment and has historically traded as A.O. Smith Water Heaters in the UK.
Highest quality products and services
We prioritise our clients’ needs to deliver bespoke, practical systems.
Full aftersales support
Maintenance and service packages, commissioning, spares, warranty and technical support for your application.