The Adveco SSB-E is a range of tough, stainless steel electric water heaters for commercial DHW applications. Based on the SSB buffer vessel, the SSB-E, through the addition of a specialised single or double-mounting flanges integrates electric immersions becoming a full-fledged electric water heater. SSB-E is available from 200 to 2500 litre capacity variants with up to 84 kW of heating for larger scale commercial hot water demands.
Heating capacity is achieved with up to four primary three to 12 kW immersion heaters. The addition of an immersion of three to 36 kW, installed in the side port is typically used to supply built-in redundancy, but can be used to raise overall heating capacity in high-demand scenarios.
The specialised flanges angle the primary heating elements downward into the vessel ensuring water is heated from the bottom of the tank for optimal efficiency. This energy efficiency is further improved through the addition of 100-125 mm removable insulation.
Alongside the advantages of built-in redundancy, the multiple immersions allow for individual element control. Adveco can supply bespoke control box systems that enable full, individual control of temperature, with easy switching and customisation allowing for varying periods of demand or differential tariff supplies.
Manufactured from high-grade AISI 316L austenitic stainless steel, the Adveco SSB-E range is designed and manufactured to the requirements of the Pressure Equipment Directive (97/23/EC) capable of delivering a maximum working pressure of 6 bar at 85°C. All vessels are tested to the procedure defined in BS EN 12897:2006 and are WRAS certified.
With a wide choice of water capacities, single or double flanges plus a range of immersion sizes and combinations, the Adveco SSB-E provides a bespoke water heater for the most demanding commercial hot water applications.
Discover more about SSB-E and Adveco’s other stainless steel hot water tanks for your bespoke applications.