Hot water specialist Adveco launches the high capacity ADV65-110W ASHP series of integrated monobloc R32 air-to-water heat pumps, providing a high quality, high-efficiency low-carbon resolution for large-scale commercial heating and hot water systems.
- Introduces ADV65-110W ASHP for large-scale commercial heating and hot water systems
- Modular design and cascade control for up to 16 units for a total capacity of 1760kW
The two new models, 65 kW and 110kW, further expand the new ADV-W ASHP range of heat pumps providing consultants and contractors on commercial building projects with a complete year-round heating system that can replace, or work in synergy with traditional gas or the latest generation of electric boilers as part of a hybrid domestic hot water (DHW) application ensuring the highest degree of efficiency without compromise to overall performance or reliability
The ADV65-110W ASHP is a simple-to-install external monobloc unit comprising an environmentally friendly R32 refrigerant circuit, integrated plate heat exchanger and pump. Effective with ambient air temperatures as low as -20°C, the ADV65-110W ASHP can provide hot water at up to 65°C throughout the year while significantly reducing building emissions.
“ADV65-110W heat pumps are a compelling answer to any large-scale DHW, heating or cooling project in a commercial building,” said Greg Brushett, Sales Director, Adveco. “Easy to install, efficient and quiet to run, and simple to maintain, these heat pumps offer market-leading performance in all UK climates, delivering higher working temperatures from its well understood, and inherently safe R32 refrigerant circuit.”
Rated A+++ (seasonal energy efficiency class), ADV65-110W offers a robust energy efficient hydronic system capable of supplying heated water for DHW (domestic hot water) applications or can be circulated to low-temperature heat emitters (floor heating loops or low-temperature radiators) to provide space heating. The 4-way valve in the outdoor unit can reverse the refrigerant cycle so that the hydronic system can also provide chilled water for cooling using fan coil units.
Smart controls provide intelligent climate curves that adjust water temperature automatically, enabling higher water temperature output up to 65°C at -10°C ambient temperature for consistent 62°C DHW in the cylinder. Adveco will combine ADV65/110W ASHP with top-up heating from a gas water heater, or a commercial electric boiler and potentially solar mid-heat to provide the most efficient and cost-effective low-carbon system. With built-in group control for up to 16 ADV65/110W ASHP units, a single controller system can drive a total capacity of 1,760kW. A maximum of 16 controllers can also be connected to the BMS, managing up to 256 units meeting the demands of the largest, most complex systems in a compact, space-saving arrangement.
The ADV65-110W ASHP Range Key Features
- Single external monobloc unit design
- Low GWP R32 refrigerant reduces environmental impact
- Low noise impact with multiple silent operation modes
- Maximum flow temperature of 65°C achievable down to -10°C ambient temperatures
- Designed for UK climate conditions, maintaining year-round high efficiency (-20°C – +43°C)
- Includes low voltage enable and fault signals, MODBUS support, built-in external pump and cascade controls, and a remote digital control interface as standard
- Cascade control for up to 16 units from a single controller with Modbus support
Discover more about the ADV65-110W ASHP and ADV16-30W ASHP ranges
